PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== 3D Modeling in ArmA 3 ======

ArmA 3 modeling. 3D model file extension is P3D and bis changed to use type 70 P3D file format, old ArmA 2 tools (like Oxygen 2) most likely wont work anymore.

[[arma3:bis-example-character-model|ArmA 3 BIS Example Character MLOD/P3DM Model]]

[[arma3:alwarren-weapon-collimator-sights|ArmA 3 Weapon Collimator Sights Tutorial]] by Alwarren

**ArmA 3 Custom Characters Head visible in freelook mode.**

Its really strange that when you use freelook mode, you can see your custom character's head in this view if you look into sides. Default ArmA 3 bis characters do not show head in this view, nor other views.

It appears to be the ArmA 3 head (proxy?) model that shows up as its so detailed. From which LOD this comes is unknown, normally when you are in use of your character, you see View-Pilot LOD. However in my tests I removed old custom head and the HMD proxy, so where it gets the head model is unknown.


====== Misc ======

Misc ramblings which have no better page location yet.

[[arma3:modeling:hiddenselectionsmaterials|hiddenSelectionsMaterials]]


===== Object Builder Section Count Updates =====

Section count wont update until you go to another LOD and then back. Unless you cut and paste the object out then back in, that refreshes the section count instantly, but thats not always a wise thing to do if the model has two textures applied to welded geometry. Since cutting the part out will remove the connecting faces, so the move top/bottom thing is safer if a little slower.


===== Geometry LOD =====

Geometry LOD only gets in count when it comes to collision with Objects (Trees, Houses), so a simple shape is enough. Geometry Phys is for "interacting" with other Vehicles (PhysX Objects like Cars, Planes etc).


===== Geometry Fire =====

Materials assigned to the fire geometry LOD.

The Fire Geometry consists of blocks that have materials like metal_plates, armor_plates, glass etc.

When a bullet hits the fire geometry, it is checked whether the hit is inside a hit point, and if yes, the hit point gets damaged
[[https://community.bistudio.com/wiki/Arma_3_Damage_Description|Arma_3_Damage_Description is a pretty good explanation]]


===== Walk-able Object Geometry Size =====

Ship or Bridge, ie walk-able object sizes is 72 meters.

https://community.bistudio.com/wiki/LOD#Roadway\\
https://community.bistudio.com/wiki/Arma_3_Ships_Config_Guidelines#Model_requirements_.7Bp3d.7D


===== planeX =====

If you're having problems with planeX not having breaks engaged on stop- since v1.66 planes use physx wheel setup & you have to setup model & config accordingly.


===== Model.cfg Extern =====

If you have old model.cfg files that were not so properly made and you just recently started to use pboProject then its most likely you will run into severe model.cfg extern not allowed errors.

You cannot have "class default;" in model.cfg (unless its not the "master" config, but that is beyond the scope of this text). You need to properly fill that class.

Proper class Default:
<code cpp>
class CfgModels
{
	class Default
	{
		isDiscrete = 1;
		skeletonInherit = "";
		skeletonBones[] = {};
	};
</code>
Usually you get default, vehicle, ship, plane, etc type of extern / inherit errors, assuming you have old style lazy / wrong model.cfg writing style.
PMC Editing Wiki

User Tools

Site Tools

Page Tools
