PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Smooth and Sharp Edges ======

**Smooth and Sharp Edges** by Ian Malcolm

Maybe you already met with this problem: you need to create very angular object,but if you try to do that it´s till not that what you want (picture)

{{ https://pmc.editing.wiki/images/SmSh_box_bad.jpg }}

but you want it looks like this one:

{{ https://pmc.editing.wiki/images/SmSh_box_good.jpg }}

What you must do? It's very simply select all faces (CTRL-A) and press U.

Smooth and Sharp Edges, Working with cylinders.

Look at this muzzle before using Sharp edges:

{{ https://pmc.editing.wiki/images/SmSh_cylinder.jpg }}

Little bit ugly, dont you think? Nevermind! we'll repair it, select all "start places" of all cylinders.

{{ https://pmc.editing.wiki/images/SmSh_cylinder_start.jpg }}

Then press U for sharp and as you can see it looks much better.

NOTE: Don't sharp all faces on cylinder

{{ https://pmc.editing.wiki/images/SmSh_cylinder_sharp1.jpg }}

Sharp only the edges!

{{ https://pmc.editing.wiki/images/SmSh_cylinder_sharp2.jpg }}

I hope this sharp mini tutorial will help to your model be more sharped & realistic.


====== Notes ======

This tutorial was written by Ian Malcolm in [[http://status.webz.cz/tutorials/index.htm|status.webz.cz/tutorials/]]

PMC Editing Wiki

User Tools

Site Tools

Page Tools