PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FXY File Format ======

The OFP and ArmA engines use a limited set of bit mapped fonts developed by Bohemia Interactive for the engine. They are bitmaps and each glyph within is treated as a texture.

A character set (such as [[http://en.wikipedia.org/wiki/ASCII|Ascii]]) is a series of 'glyphs' (characters) where any one of these characters is always identified by the same index value. For example the letter **A** is always hex **41** and so on. Regardless of the font set employed, the character set within it, is set-in-concrete. Hex 41 always renders a glyph that 'looks like' the letter A. Be it **bold**, //italic//, or fills the entire screen, it is the letter 'A'.

The character set for all BI fonts approximates [[http://en.wikipedia.org/wiki/Code_page_437|US-Ascii codepage 437]].

A font set is a collection of displayable characters (termed glyphs) that have a common appearance. Eg all glyphs in THIS set are bold, or all the glyphs are italic, all the glyphs are Times Roman (seriffed).

Individual font sets exist for Tahoma, Garamond, and so on.

The glyphs within these sets, are contained in [[arma:paa|.paa]] files. Generally, the entire font set = one, paa file.

And, because these are bitmapped fonts, eg fixed dimensions, non-scaleable, there are unique font sets, for, unique sizes.

For example, in Resistance engine, the popular Tahoma font is in three different font sets. 24 point, 36 point, 48 point.

A 'point' approximates 1/72th of an inch. Thus the Tahoma fonts available (for Resistance) are approximately a third, a half, and two thirds of an inch tall when displayed.

====== Description ======

An fxy file is the 'character set' index. It is, the codepage.

An fxy file is implicitly associated with one or more paa files within the same folder. The fxy file is the header entry for these files, it describes the position in the paa file and the size to be rendered on screen, for a 'glyph'.

Association of files between fxy and paa is implicit. The CourierNewB64.fxy is implicitly associated with the CourierNewB64-xx.paa file(s). xx indicating one of several CourierNewB64 paa's.

====== Struct ======

The fxy is a contiguous series of 12 byte entries. Because the first 32 indexes of an Ascii codepage are unprintable, there are only 256-32= 224 entries in any fxy file. They declare each of the 224 'printable characters'. (Note: Some ArmA fxy's have 1088 entries) 

Each entry can be described in the following struct

<code>
 struct FxyEntry {
   ushort  AsciiCode;     // '''0x21''' = 'A' <<< see note
   ushort  PaaFileNumber; // 01
   ushort  X,Y            // Top-left Corner of char on the texture '''in pels'''
   ushort  Width,Height;  // 10,14 in '''bytes'''.
 };
</code>

**AsciiCode** At first glance, this appears odd. The **ASCII** codepoint index for the letter 'A' is Hex 41. However, the first 32 'characters' in an ascii codepage are non-displayable 'control chars' such as newline, such as ETX. Because of this there is no point creating them in the paa file, and no point, defining them in the fxy. Therefore, the indexes to characters are biased by hex 20. Thus 'A' == hex 21 above + an implicit hex 20 == hex 41

**PaaFileNumber** -number of texture file:\\
This is simply a convenience to allow large fonts to be spread across several paa's.
<code>
 font name is "CourierNewB64" 
 Fxy file is "CourierNewB64.fxy", 
 First texture file is "CourierNewB64-01.paa", 
 second is "CourierNewB64-02.paa".
</code>

====== Usage ======

This example using the new font name in a ArmA description.ext.

<code>
 class RscText
 {
        type = CT_STATIC;
        idc = -1;
        style = ST_LEFT;
        colorBackground[] = {0, 0, 0, 0};
        colorText[] = {1, 1, 1, 1};
        font = '''Bitstream''';
        sizeEx = '''0.04''';
 };
</code>

====== Paa Content ======

====== Resistance ======

.paa files used for the font must be in 8080 format: (Alpha luminosity)

<code>
 8bit - Brightness (all with 255 value - "white");
 8bit - Alpha (255 for character, 0 for space);
</code>

====== ArmA ======

Arma Glyph files (paa) are formatted in DXT5 compressed textures. Using the TAGG labelling, they must additionally specify

<code>
 Avg Color: any
 Max Color: always FFFFFFFF
 AlphaFlag: 1
</code>

====== Available Fonts ======

====== Resistance and CWC ======

<code>
 AudreysHand 48pt Italic
 AudreysHand 48pt Bold
 CourierNew Bold 64pt
 Garamond 64
 Steelfish bold 64 and 128 pt
 SteelfishCE bold 64 
 Tahoma 24/36/48 bold
</code>

====== Elite ======

<code>
 Arial Bold 7,8,10,11,12 pt
 Arial Italic 9,13,18,48
 CourierNew 9pt
 Hel67-CM 10,11 pt
 HelvCondLight 8,9,10 pt
 Helvetica-Narrow 11pt
 Helvetica-Narrow Bold 8pt
 Helvetica37-CondensedThin bold 10pt
 Helvetica57-Condensed 10,13,16pt
 Helvetica57-Condensed 9 ,13,14 pt Bold 
 Helvetica67-Condensed 10,11,9pt Medium
 HelveticaNarrow 10,11pt
 HelveticaNarrow bold 10,13,18,22
 HelveticaNeue 10,11,12,13,14,22
 HelveticaNeue  Bold 22 B22-01.paa
 LucidaConsole Bold 11,8
 MSS Bold 9
 System 10pt
 System 10pt Bold
 Tahoma 10,11,12,14,16,20,21pt
 Tahoma 5,6,7,9,10,11,12,13,14,16,20,21 pt bold
 Tahoma 12pt Bold Italic
</code>

====== ArmA ======

<code>
 Arial Bold 7->24 pt
 BitStreamVersans bold 7->20, 22, 28 pt
 Zepellin32 12->20,22,28 pt
 Zepellin33 12->20,22,28 pt
 Zepellin33 12->20,22,28 pt italic
</code>
PMC Editing Wiki

User Tools

Site Tools

Page Tools
