PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Object Files ======

Object files, their descriptions and functions.

Understanding the objects directory files. The following list is taken from [[falcon4:superpak|SuperPAK v4.2]] terrdata/objects/ directory. Object files are edited with [[falcon4:tools:f4browse|F4Browse]].

Source ([[http://tactical.nekromantix.com/forum/viewtopic.php?t=21073|our forum]]).


====== Falcon4.vcd ======

**Falcon4.vcd**

Vehicle file, includes ground units and aircrafts. 


====== Falcon4.ucd ======

**Falcon4.ucd**

Unit file. 


====== Falcon4.rcd ======

**Falcon4.rcd**

Radar file. 

Linked in the ACD data .

sound and image # = this are the sound # and image that would show up on RWR of affected radar . Note if there is a radar.dat linked then that over-rides these numbers .

High and low gains = this values show how sensitive this radar shows in RWR of other ac .

Sweep rate  = this is sweep angle in radian per seconds

Beam half angle = this is in radians again .

Scan half angle azimuth = this is scan angle of azimuth in radians .

Range = this is range of radar in ft .

lock time = this is lock time in ms (longer means better )

Lock down = this is lock down multiplier .

Chaff chance = this is a value how effective chaffs are against radar .(lower , chaffs less effective)

ECN range = this is multiplier of how resistant the radar is to ECM .

Beam distance = this is beam distance multiplier .

Doppler notch speed = This is speed that any slow radar woun't track it , in ft per seconds . 

**Flags**

Here you setup what radar options/features radar has .

Has NCTR capability 

Has TWS capability 

Has TFR capability 

Is air to ground radar

Is air to air radar





====== Falcon4.wcd ======

**Falcon4.wcd**

Weapons control data file. 

Weight = weight of weapon in Lbs

Damage = damage amount weapon has 

Blast radius = radius in ft of blast radius 

Range = range in Km of weapon (used by AI for selection of best weapon, as one variable )

Drag = Drag od weapon on Hardpoint .

Explosion type = type of war head of weapon (what type of damage does it do )

Guidance = type of guidance weapon is 

CT index = CT linked to weapon

Seeker radar = radar (RCD) linked to weapon (example aim120 =4 )

Fire rate = how much AI fire rate in Sim

Rack group = rack group linked to weapon (used for linking weapons to plyons (rack.dat)

Max alt = max ft weapon will be fire by AI 

Hitchance = various % rates for different types of target (mainly 2d stuff )

**Flags**

These are used to setup weapon enity ,which could be a fuel tank, rack, ECM pod or weapon .

Recon, used for low alt camera

Fuel , used for fuel tanks

ECM, used for ECM pods

Area affect , used for weapons that will hit the ground .

Cluster , used for cluster type bombs

Bomb, Bomb snd and Bomb GPS, used mainly on weapons like GBU15, AGM154, that are setup like missile but you want them to simulate a bomb .

Tracer , used on guns you want tracers on .

Ammo 1/10 is used for gun rounds count, mainly on AC guns .

3rd gen LGB, this is used on all 3rd gen LGB  :-)

No trail, used if weapon has thrust or smokeless exhaust .


====== Falcon4.swd ======

**Falcon4.swd**

Sim weapons data file. Data on weapons type uses and guidance .

This is linked from WCD (weapons data) .


Air/ground = this is weapon type, were its used (not weapon, air weapon, ground weapon etc )

Avionics = this is type of guidance for weapon (radar AAM , IR AAM , sam , gun/tank, optical etc )

Missile pointer = this is the missile flight model data # listed in mistype.lst .

Weapon Type = this is weapon type (A/A, A/G, rocket, harm etc )

Drag = this is a drag value (not to be confused with drag in WCD (on HP )

Weight = this is weight of weapon. (not sure this is even used )

area = this is cross section area (again not sure its used )

====== Falcon4.ssd ======

**Falcon4.ssd**

Squadron stores data file. 

This gets linked from Squadron Unit data (UCD) .

Lists all the weapons and count for this squadron (need values for weapons for resupply in campaign .

====== Falcon4.icd ======

**Falcon4.icd**

Mostly linked in missile data files (seeker version)

InfraRed control data file. 

range = range of seeker

FOV = FOV of seeker

Gimbal limit = Max angle of seeker gimbal 

Ground factor = how hard ground interfers with seeker (higher # better seeker)

Flare factor = how easy flares spoof seeker (smaller better seeker,harder to spoof)

====== Falcon4.rwd ======

**Falcon4.rwd**

Radar warning receiver data file. 

Gets linked in the ACD data .

Range = this is a value equal to radar range (example 1.0 RWR would be equal to radar range of ac showing up )

Scan angles = this is scan angles the RWR is able to scan around the vehicle .

Top , bottom , left and right  . Values are in radians .

**Flags**

Most of these are self explaining, you setup RWR flags with the capability (how good) .

The best, highest is 9 (can detect exact location, can get exact heading )

====== Falcon4.vsd ======

**Falcon4.vsd**

Visual sensor data file. 

VSD gets linked in the ACD data 

Range = this is range of visual sensor in ft .


Scan angles = in radian the visual scan around the vehicle .

Top , bottom, left and right , all in radians .

====== Falcon4.acd ======

**Falcon4.acd**

Aircraft data file. 

ACD data # gets linked to the VCD data (vehicle data)

Combat class = This is a value that give different AI flying specs , (0-8 )

Airframe = This is pointer to flight model data # from actype.lst in acdata folder (simdata.zip )

first sensor = here you set sensor type and linked # (normally this is visual one)

Second sensor = here you set sensor type and linked # (normally this is radar one)

third sensor = here you set sensor type and linked # (normally this is RWR one)

Forth sensor = here you set sensor type and linked # (could be IR one if appropriate )

====== Falcon4.wld ======

**Falcon4.wld**

Weapons load data file. 

This holds all weapons of a hardpoint #

position = just were in list weapon stored.

count = this you can alter how many of weapon can be loaded .

weapon ID = this is the weapon reference wcd # of weapon 

====== Falcon4.fcd ======

**Falcon4.fcd**

Features control data file. 

Ct pointer = is just CT # linked to the feature

Radar = you can link radar data to a feature (example search radar )

Repair time = how many hrs will this feature get repaired .

Hitpoint = This is how many hitpoints it takes to destroy (just like HP in VCD data )

Height = you can set a height for object so AC clears it in terrain following (?)

Detection by = This you can set values in Km for objects (you would use low air and air for search radar )

Vulnerability = here you set % of weapons type that can destroy the feature (tied to hitpoint for total hp needed to destroy )

====== Falcon4.ocd ======

**Falcon4.ocd**

Objective control data file. 

This is the data that contains all the feature (buildings etc ) linked through the FED to a objective. 
Airbase would have all the runways, taxiways , hangers ,etc 

====== Falcon4.fed ======

**Falcon4.fed**

Feature object positioning / linking in a objective.

Fed links features to the objective FED objects

 

====== Falcon4.pd ======

**Falcon4.pd**

Point data file. Parking spots for vehicles. 


====== Falcon4.phd ======

**Falcon4.phd**

Point data header file. Same as above.
PMC Editing Wiki

User Tools

Site Tools

Page Tools
