Differences

This shows you the differences between two versions of the page.

--- falcon4:campaign:files [2007-07-08 12:19]
snakeman created files initial page
+++ falcon4:campaign:files [2010-08-21 13:27] (current)
ed_1
@@ Line 14: / Line 14: @@
 **attrit.pri**
+not used AFAIK
+AFAIK it "was" suppose to change to different priority according to how campaign goes, but wasn't done .
 ===== Auto Save.cam =====
@@ Line 24: / Line 28: @@
 **cas.pri**
+ not used AFAIK
+AFAIK it "was" suppose to change to different priority according to how campaign goes, but wasn't done .
 ===== DEFAULT.idx =====
@@ Line 36: / Line 43: @@
 **Defense.pri**
+not used AFAIK
+AFAIK it "was" suppose to change to different priority according to how campaign goes, but wasn't done .
 ===== doctrine0.txt doctrine0 through 7 =====
@@ Line 70: / Line 81: @@
 <code>
-MaxFlymissionNoThreat
-</code>
+LongrangePlanMinTime – If the mission is longer than or equal to and the Time on Target is less than this value,
+ the mission will be cancelled.
+LongrangePlanMaxTime – Not Used
+AircraftAssignmentRatio – Not Used
+MaxFlymissionThreat – This is used when the mission is not flagged in the Mission.dat as either High Threat or No Threat missions.
+MaxFlymissionHighThreat - This is used when the mission is flagged as a high threat mission in the mission.dat file
+MaxFlymissionNoThreat - This is used when the mission is flagged as a no threat mission in the mission.dat file.
+      (Increasing this to 100 boosts up mission tasking).
+MinSeadescortThreat – When the target area’s threat value is worked out to be higher than this
+ (looks at the min and max altitudes for the mission type), the ATO will add a SEAD Escort request to the package.
+MinAvoidThreat – When Falcon makes a mission, it checks the threat at the ingress and egress waypoints –
+  if the threat is higher than this value, then the mission planner tries to create a waypoint around the threat
+  (within the AirPathMax value).
+  If it can not find a way around the mission is cancelled.
+MinAssemblyPtDist – The minimum distance from mission start that the Assembly point can be (In Km)
+BreakpointDist – The distance that the breakpoint should be from home plate. (In Km)
+TargetClearRadius  - Not Used
+LoiterTurnDistance – The length of the loiter area for CAPS and other Patrol flights (In Km)
+SweepRadius – The distance that a sweep will take in. (In Km)
+MinimumBDAPriority – The minimum priority of target that a BDA flight will get assigned for
+MinimumAWACSDistance – The closest an AWACS will get to the FLOT (In Km)
+MaximumAWACSDistance – The furthest an AWACS will get from the FLOT (In Km)
+MinimumJSTARDistance – The closest a JSTARS a/c will get to the FLOT (In Km)
+MaximumJSTARDistance – The furthest a JSTARS a/c will get from the FLOT (In Km)
+MinimumTankerDistance – The closet a Tanker will get to the FLOT (In Km)
+MaximumTankerDistance – The furthest a Tanker will get from the FLOT (In Km)
+MinimumECMDistance – The closet an ECM flight will get to the FLOT (in Km)
+MaximumECMDistance  - The furthest an ECM flight will get from the FLOT (in Km)
+FirstColonel – Sets the start of names for Colonels
+FirstCommander – sets the start of names for Commanders
+FirstWingman – sets the start of names for Wingman
+LastWingman – Sets the end of names for wingman
+MaxEscortAAStrength – Not Used
+BARCAPRequestInterval – The time between BARCAP Planning Requests
+OnCallFlightsPerRequest – The amount of On Call Flights per FAC mission
+AirTaskTime – Not Used
+AirPlanTime  - Sets Average Sortie Rate  = 60/AirPlanTime = Avg Sortie Rate.
+VictoryConditionTime – How often the victory conditions are checked in TE
+FlightMoveCheckInterval – How often the campaign checks the movement of flights. (in seconds)
+FlightCombatCheckInterval – How often the campaign checks combat between flights (in seconds)
+AirUpdateCheckInterval – How often the campaign checks the movement of squadrons/packages (in seconds)
+PackageCyclesToWait –sets how many cycles a mission will wait for Tankers and other support aircraft.
+AirPathMax - Max search range when trying to find a safe path between two waypoints. Limits the searching to this value
+MinimumIgnoreRange – The closest range where an aircraft is ignored. (in Km)
+MaxSARDistance – The furthest behind the FLOT that SAR can be undertaken.
+MaxBAIDistance  - The furthest behind the FLOT that BAI can be undertaken.
+PilotAssignTime – The amount of time before T/O time that the pilot gets assigned to the mission.
+AircraftTurnaroundMinutes – How long after an aircraft has completed a mission before it is ready for use again.
+// NTM Inputs
-Increasing this to 100 boosts up mission tasking.
+short MIN_TASK_NAVAL;				// Retask time, in minutes
+short MIN_PLAN_NAVAL;				// Replan time, in minutes
+short NAVAL_MOVE_CHECK_INTERVAL;		// How often to check a task force for movement (in seconds)
+short NAVAL_COMBAT_CHECK_INTERVAL;		// How often to fire naval units (in seconds)
+short NAVAL_COMBAT_RATE;			// Amount of time between weapon shots (in seconds)
+// Other variables
+short LOW_ALTITUDE_CUTOFF;
+short MAX_GROUND_SEARCH;	          	// How far to look for surface units or objectives
+short MAX_AIR_SEARCH;		           	// How far to look for air threats
+short NEW_CLOUD_CHANCE;
+short DEL_CLOUD_CHANCE;
+short PLAYER_BUBBLE_MOVERS;			// The # of objects we try to keep in player bubble
+short FALCON_PLAYER_TEAM;			// What team the player starts on
+short CAMP_RESYNC_TIME;				// How often to resync campaigns (in seconds)
+unsigned short BUBBLE_REBUILD_TIME;		// How often to rebuild the player bubble (in seconds)
+short STANDARD_EVENT_LENGTH;			// Length of stored event queues
+short PRIORITY_EVENT_LENGTH;
+short MIN_RECALCULATE_STATISTICS;		// How often to do the unit statistics stuff
+float LOWAIR_RANGE_MODIFIER;			// % of Air range to get LowAir range from
+short MINIMUM_STRENGTH;				// Minimum strength points we'll bother appling with colateral damage
+short MAX_DAMAGE_TRIES;				// Max # of times we'll attempt to find a random target vehicle/feature
+float REAGREGATION_RATIO;			// Ratio over 1.0 which things will reaggregate at
+short MIN_REINFORCE_TIME;			// Value, in minutes, of each reinforcement cycle
+float SIM_BUBBLE_SIZE;				// Radius (in feet) of the Sim's campaign lists.
+short INITIATIVE_LEAK_PER_HOUR;			// How much initiative is adjusted automatically per hour
+int StartOffBonusRepl;	 			// Replacement bonus when a team goes offensive
+int StartOffBonusSup;	 		        // Supply Bonus when a team goes offensive
+int StartOffBonusFuel;	 			// Fuel Bonus when a team goes offensive
+int ActionRate;					// How often we can start a new action (in hours)
+int ActionTimeOut;				// Maximum time an offensive action can last
+float DataRateModRepl;				// Modification factor for production data rate for replacements
+float DataRateModSup;				// Modification factor for production data rate for fuel and supply
+float RelSquadBonus;				// Relative replacements of squadrons to ground units
+</code>
 ===== FALCON4.RT =====
@@ Line 132: / Line 229: @@
 **Intdict.pri**
+This is the primary file of the three that only works (intdict , defense, atrit , cas. pri
+AFAIK it "was" suppose to change to different priority according to how campaign goes, but wasn't done .
 ===== kneemap.gif =====
@@ Line 137: / Line 238: @@
 **kneemap.gif**
-Kneemap GIF image which is shown on cockpit. 256 color image, resolutions 512x512, 1024x1024 and 2048x2048, not sure if 256x256 is also supported.
+x1024 gif image of theater map. More details see [[falcon4:campaign:kneemap|Kneemap]] page.
 ===== <theater>.idx =====
@@ Line 206: / Line 307: @@
 **OFFENSE.PRI**
+not used AFAIK
+AFAIK it “was” suppose to change to different priority according to how campaign goes, but wasn't done .
 ===== PackHead.b =====

PMC Editing Wiki

User Tools

Site Tools

Differences

Page Tools