PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Proxy ======

These are the proxys used in the vehicles and units. Proxy is like a place in a helicopter where pilot is going to sit ingame.


====== BIS Models Proxys ======

Proxy name / Proxy ID

**A10**\\
\ca\A10\AGM65 .001\\
\ca\A10\AGM65 .002\\
\ca\A10\AGM65 .003\\
\ca\A10\AGM65 .004\\
\ca\A10\AGM65 .005\\
\Ca\temp\proxies\A10\Pilot .001

**BMP**\\
\CA\temp\proxies\BMP2\Commander .01\\
\CA\temp\proxies\BMP2\Driver .01\\
\CA\temp\proxies\BMP2\Gunner .01

**Hummer**\\
\CA\temp\proxies\UAZ\cargo01 .01\\
\CA\temp\proxies\hmmwv\cargo01 .02\\
\CA\temp\proxies\UAZ\cargo01 .03\\
\CA\temp\proxies\hmmwv\driver .01\\
\CA\temp\proxies\hmmwv50\gunner .01

====== Synide's MLOD Converts Proxys ======

Proxy name / Proxy ID

**A10**\\
\ca\a10\agm65 .001\\
\ca\a10\agm65 .002\\
\ca\a10\agm65 .003\\
\ca\a10\agm65 .004\\
\ca\a10\agm65 .005\\
\ca\temp\proxies\a10\pilot .001

**AH6**\\
\ca\temp\proxies\ah6\pilot .01\\
\ca\temp\proxies\ah6\cargo .01

**MH6**\\
\ca\temp\proxies\ah6\cargo .01\\
\ca\temp\proxies\mh6\cargo01 .02 (front seat)\\
\ca\temp\proxies\mh6\cargo02 .03 (back seat)\\
\ca\temp\proxies\mh6\cargo03 .04\\
\ca\temp\proxies\mh6\cargo03 .05\\
\ca\temp\proxies\ah6\pilot .01

**UH60**\\
\ca\temp\proxies\uh_60\cargo01 .01 (front seat)\\
\ca\temp\proxies\uh_60\cargo02 .02 (back seat)\\
\ca\temp\proxies\uh_60\cargo02 .03\\
\ca\temp\proxies\uh_60\cargo02 .04\\
\ca\temp\proxies\uh_60\cargo02 .05\\
\ca\temp\proxies\uh_60\cargo02 .06\\
\ca\temp\proxies\uh_60\cargo02 .07\\
\ca\temp\proxies\uh_60\cargo02 .08\\
\ca\temp\proxies\uh_60\cargo02 .09\\
\ca\temp\proxies\uh_60\cargo02 .10\\
\ca\temp\proxies\uh_60\cargo02 .11\\
\ca\temp\proxies\uh_60\cargo02 .12\\
\ca\temp\proxies\uh_60\cargo02 .13\\
\ca\temp\proxies\uh_60\pilot .01

**UH60MG**\\
\ca\temp\proxies\uh_60\cargo01 .01 (front seat)\\
\ca\temp\proxies\uh_60\cargo02 .02 (back seat)\\
\ca\temp\proxies\uh_60\cargo02 .03\\
\ca\temp\proxies\uh_60\cargo02 .04\\
\ca\temp\proxies\uh_60\cargo02 .05\\
\ca\temp\proxies\uh_60\cargo02 .06\\
\ca\temp\proxies\uh_60\cargo02 .07\\
\ca\temp\proxies\uh_60\cargo02 .08\\
\ca\temp\proxies\uh_60\cargo02 .09\\
\ca\temp\proxies\uh_60\cargo02 .10\\
\ca\temp\proxies\uh_60\cargo02 .11\\
\ca\temp\proxies\uh_60\cargo02 .12\\
\ca\temp\proxies\uh_60\cargo02 .13\\
\ca\temp\proxies\uh_60\gunner .001\\
\ca\temp\proxies\uh_60\gunner .002\\
\ca\temp\proxies\uh_60\pilot .01

====== Pilot Proxy Visible in Buldozer ======

How to make your pilot, driver, gunner or cargo proxys visible in buldozer so you can tweak their placement with precision instead of guessing? Well do these simple steps.

1) Open BIsoldier.p3d.\\
2) Save it to \ca\temp\proxies\uh_60\cargo01.p3d.\\
3) Open animations window.\\
4) Right mouse click on animations box and select From Matrices (all LODs), browse to Your \ca\air\data\anims\ and choose UH60_Cargo01.rtm file.\\
5) Click the 0.0 keyframe.\\
6) Save your cargo01.p3d proxy again.\\
Done!

Now when you select an model that has \ca\temp\proxies\uh_60\cargo01.p3d proxy in it, it will show up properly in buldozer. Feel free to ask questions about this tutorial in [[http://tactical.nekromantix.com/forum/viewtopic.php?t=21253|this]] topic.
PMC Editing Wiki

User Tools

Site Tools

Page Tools
