PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ArmA 3 Terrain Processor ======

Terrain Processor is basically object placer. Its like enhanced version of Shezan74's World Tools (no relation though).


====== Project Templates (TPP) ======

PMC has provided full project templates for download, see [[arma3:terrain:terrain-processor-templates|Terrain Processor templates]].


====== TPP Naming Rules ======

**TPP** is terrain processor project file.

TPP Naming Rules:
<code>
<TPP_TASK>_<ADDON>_<DESCRIPTION>
</code>

For example:
<code>
Area_High_Density_Cluster_A3_
Area_High_Density_Cluster_Tanoa__
Area_High_Density_Cluster_CUP_Chernarus_
Area_High_Density_Cluster_CUP_Takistan_
Area_Random_A3_
Area_Random_Tanoa__
Area_Random_CUP_Chernarus_
Area_Random_CUP_Takistan_
</code>


====== Searching for Settings ======

In order to find project settings that are suitable for your shapefiles / terrain, you should always start with hectare density 1. This way it doesn't take long time to generate the objects so if there are problem with later task or something like this, it wont take long for you to discover it.

Also the object list you selected is quick to tweak with very small project generation time. Generate, check, and do it all over again. If you have huge project that takes half an hour to generate, its no fun going back and forth with that kind of waiting time.

You can take the hectare density 1 generated objects number and double it for every time you increase the value by one. Like if you get 1000 objects with value 1, then you should expect to get 2000 objects with 2 etc.


====== Mask: Linear ======

Can be used with road shapefiles to clear a path into already placed objects within this TP tasking session.

Add task, choose mask: linear, then pick your roads shapefile, configure how wide area it would clear and its done. Make sure this is the LAST task to run in your TP project.


====== Forest Settings ======

^ Hectare Density ^ Result ^
| 5 | Few trees here and there |
| 30 | Still not looking like a forest |
| 100 | Looks like average forest |

Bushes for forest, not sure if this fits with pine trees: b_betulaHumilis

CUP A1 sahrani Palm trees for iraq, libya and syria region does not look good with hectare density 100 as somehow palms are not same as pine trees which create thick forest, palms need to be more sparse. Use less than 100 for middle eastern palms, maybe 50 or less.


====== Line: Regular ======

Use this to place walls. Use terrain builder to create polylines for walls, export the shapefile. Then in terrain processor create Line: Regular ask, add your wall object and make sure its distance is correct in parameters tab. Select shapefile and run it.


====== User Guide ======

Terrain Processor (TP for short) is a bitch, you make one slight wrong configuration and BANG it crashes or freezes without mercy :)

Project *.TPP files are XML format, you can edit them but as bis TP manual states its not advised as its easy to make mistakes and again TP will crash, so be very very careful.

You should name every TPP project file with very descriptive file name (normal rules apply, no spaces, no stupid characters) so you can re-use them with other terrains in the future.

It is cumbersome to add object template names into the projects so once you do it, save the tpp file that you don't have to type in all those templates next time you want to place forests etc. Also inside <ObjectPrototypes> you can use text editor to copy paste from area random into high density cluster.

**Area: High-density Cluster**, if you drop object probability to 2, it starts to really slow down the object creation.


====== Road Smoothing ======

**Heightmap: Road integration**

Does TP place your smoothed out roads 500m below ground?

Shapefiles must be within the mapframe bounds before using TP to flatten the road surfaces or you will end up with super deep valleys carved into your terrain heightmap.

If your road smoothing will carve almost tunnel like pathway to the terrain even though it is not even that steep, you can fix it by increasing Road Maximal Slope.

If you have problems loading terrain builder exported road shapefiles, try loading and saving them in global mapper (or QGIS?) first.


====== Object Placement Statistics ======

This is nice reference read of how many objects some configs place and how long time it takes to import these to terrain builder. Computer used to create these statistics is CPU: AMD Athlon FX-4170 4.2Ghz Quad Core Black Edition, RAM: Corsair Vengeance 16GB PC3-12800 1600MHz.

Task: Area Random

Trees 12, probability 100%, minimal distance 5m.

**Polygon size about 20km x 20km**, just slightly below that size but otherwise square area.

^ Hectare Density ^ Objects Placed ^
| 1% | 41,000 |
| 10% | 413,000 |
| 20% | 827,000 |
| 30% | 1,240,000 |
| 40% | 1,654,000 |
| 50% | 2,068,000 |
| 60% | 2,481,000 |
| 70% | 2,895,000 |
| 80% | 3,308,000 |
| 90% | 3,722,000 |
| 100% | 4,136,000 |
| 110% | 4,549,000 |
| 120% | 4,963,000 |
| 130% | 5,376,000 |
| 140% | 5,790,000 |
| 150% | 6,204,000 |

Terrain builder imports 2 million object LBT file in about 10 minutes, 3,3 million objects 17 minutes. 4,1 million objects 22 minutes. 5,3 million objects 26 minutes. 6,2 million objects 30 minutes.

**Polygon size about 40km x 40km**, everything else the same as above.

^ Hectare Density ^ Objects Placed ^
| 1% | 167,000 |
| 10% | 1,674,000 |
| 20% | 3,348,000 |
| 30% | 5,023,000 |
| 40% | 6,697,000 |
| 45% | 7,535,000 |

Terrain builder imports 7,5 million object LBT file in 37 minutes.

**Polygon size about 81km x 81km**, everything else the same as above.

^ Hectare Density ^ Objects Placed ^
| 1% | 670,000 |
| 5% | 2,681,000 |
| 9% | 6,033,000 |
| 10% | 6,704,000 |

Terrain builder imports 6,7 million object LBT file in 32 minutes.
PMC Editing Wiki

User Tools

Site Tools

Page Tools
