PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Real World Data using QGIS ======

How to get real world data through QGIS into terrain builder and arma3. See our main [[arma3:terrain:real-world-data-tutorial]] page for the main tutorial part.


====== Disclaimer WIP ======

This QGIS page is work in progress, **this is not a complete tutorial**. Please [[:contact|contact]] us if you can provide any more information about QGIS real world data subject.


====== Goal of this WIP page ======

Goal of this work in progress page is to learn how to get real world data for:

  * <del>terrain</del> see [[arma3:terrain:heightmap-real-world-data]]
  * <del>satellite texture</del> see [[arma3:terrain:satellite-texture-terra-incognita]]
  * satellite mask
  * <del>roads</del> see [[arma3:terrain:road-shapefiles-real-world-data]]
  * vegetation

And process these through [[http://www.qgis.org/en/site/|QGIS]] (free open source program) into terrain builder and finally into finished arma3 terrain addon.

**I do not know if all of the above is possible, terrain is but mask? vegetation? No idea yet, I'm learning one step at the time.**


====== Install QGIS Plugins ======

Use plugins -> manage and install plugins...

Select OpenLayer and click install, select OSMDownloader and click install.


====== QGIS Settings ======

QGIS settings -> options -> CRS, allows you to setup default CRS for new projects and layers. Set this to EPSG:32631, WGS 84 / UTM zone 31N


====== Clip Data to Power of Two ======

Terrains used in arma3 can only be power of two grid, like 256 x 256, 512 x 512, etc. When you get real world data from various web sources its usually downloaded in "hand drawn box" which is not perfect square (power of two), so you must clip this data into square power of two.

PMCTODO now idea how to select power of two square other than typing in lat/lon coordinate numbers


====== OpenStreetMap ======

Once you have terrain loaded in QGIS, you can get streets / roads to show transparent on top of it. This is just an image, not actual road shapefiles, see [[arma3:terrain:road-shapefiles-real-world-data|Road Shapefiles Real World Data]] how to download roads.

Use web -> openlayers plugin -> openstreetmap -> openstreetmap (heh yes twice).

This opens open street maps layer in your project on top of your terrain heightmap. On layers panel double click openstreetmap layer to bring up its properties. Select transparency tab and move global transparency slider to about 50% then click apply and ok.

Now you can see your terrain heightmap and openstreetmap road data together.

You can click the X button in layer panel on each layer to turn them on/off.

You should download [[http://download.geofabrik.de/|OSM shapefiles from geofabrik.de]] instead.


====== Google Maps Satellite ======

Use web -> openlayers plugin -> google maps -> google satellite

Hydrra: Under Open Layers plugin there will be google maps and bing maps tabs that you can use to get your sat image.  On both street map and sat map there will be a button two rows under new file icon called download OSM data.  Use it then select the area you want to use.  let it download then when you have both your street map and sat image use the vector tool and align them.  I do believe you also need to set the SRS layer as well. UTM 31.

Hydrra: to get to the vector tool hit Ctrl + alt + T and your toolbox will pop up. Just type in vector and the tool you will most likely need is the transform tool in case your sat image and street map aren't alligned.

Hydrra: Yeah, The plugin provides both sat image and street map. just make sure to separate the layer groups so it's easier to keep track of.

You should download [[arma3:terrain:satellite-texture-terra-incognita|Satellite Texture with Terra Incognita]] instead.


====== QGIS Print Composer ======

Print Composer will save an image of your current view.

Open it by Project -> new print composer, or use CTRL-P

Make it a square pare size, for example 100mm x 100mm.

Select layout -> add map, drag a box around the white area.

The view should look like your current QGIS main view, hide/show layers to get the view you want like google satellite.

Item properties -> extents, no idea what to do with those :)

FinCenturion: you need to know now exactly how large of a chunk you need. and the coordinates / extents of this data. I have changed up everything to match arma worldspace by using the methods in my [[arma3:terrain:qgis-reproject-transform-tutorial|QGIS Reproject & Transform Tutorial]].

FinCenturion: but you need lower left corner x,y and upper right corner x,y coords\\
FinCenturion: if you have more data than you will need you can of course use an area that is in power of two - so you can keep the horizontal scale 1:1 with real life\\
FinCenturion: say you want to do a 4096 x 4096 m map, and your lower corner is in the (fictive) coords of x 1000 and y 1000 - > exents 1000, 1000 and 5096 and 5096\\
FinCenturion: if that made any sense :smile:

To save the image use composer -> export as image


====== Export Highres Satellite using QGIS ======

**A simple guide for exporting high resolution satellite maps using QGIS** by pooface

Install openweb layers for QGIS

Set your CRS (Coordinate Reference System) in QGIS of which you already know the coordinates of your map extents.

To make this possible, first find your real world location via the openweb layers plugin in QGIS, and give yourself an approximate field of view. The extents do not need to be exact, but it helps print composer.

In toolbar of QGIS find Project -> new print composer (CTRL-P)
This will open a new window.
  - add new map button on left side (white paper icon with a green "+")
  - draw a generic rectangle

On left side infobar inside composer find:

  - Item properties tab
   - under extents, set your coordinate extents based on the CRS you are using (in QGIS at the bottom right)
   - under Main properties, change from Cache (default) to Render
  - Go back to Composition tab and under Resize page to content, click Resize page
  - You should be looking at a preview of your final satellite export framed nicely.

Now you may export:

In the toolbar of the print composer window, under Composer: export as image

  - set page widgth and height in pixels.
  - Depending on how you plan to import into terrain builder, set these accordingly
example:\\
I want my satellite image to be 0.5 meters / pixel.\\
My terrain is 8192 meters by 8192 meters.\\
Therefore, I want my page width and page height to both be 16384 pixels.
  - Save and then wait for export.  If you are exporting images of these large sizes, it MAY take a WHILE!
  - Check your exported image after print composer finishes processing. Often times (for reasons I'm not sure) it may leave holes in your image, in which case I suggest re-exporting.

If you wish to reimport this to QGIS to guide your shapefile creation, you must include a .wld file of the same name as the image you just created.


====== QGIS Refactor Fields ======

OSM place names data sometimes comes with different order for the fields, this will break up PMC OSM Places CSV2HPP tool. You can fix this in QGIS by using "Refactor fields" plugin.

In processing toolbox search for "refactor fields", open it. Now you can reorder the fields mapping dialog list, so if you need to swap "name" and "type" fields, just click one and use the arrow keys to move up or down.

When reorder is OK then just click run button and it creates refactored layer with the new reordered fields.


====== Misc Notes ======

**QGIS**

[4:09 PM] NigeyS: oo reproject and transform... yeah thats gonna give me a headache\\
[4:19 PM] FinCenturion: for image export purposes you dont need to reproject and transform\\
[4:19 PM] FinCenturion: but if you wish to use shapefiles straight up in TP or TB you do\\
[4:20 PM] NigeyS: atm i just need to get it into photoshop for the layer mask\\
[4:21 PM] FinCenturion: to use print composer make  a new print composer, then under the composition tab in the workspace make sure the page is square, i use 1000x1000mm\\
[4:22 PM] FinCenturion: then use the add map function from the layout drop down box\\
[4:22 PM] FinCenturion: scale the newly added map to cover the white sheet\\
[4:22 PM] FinCenturion: then click on your new map, go to the item proprties tab on the right again\\
[4:23 PM] FinCenturion: use the Extents to get the correct display\\
[4:23 PM] FinCenturion: so you basically need to know pretty exact coords of your map\\
[4:24 PM] FinCenturion: that is why sometimes it's better to have all your shape data reprojected to arma 3 TB worldspace\\
[4:24 PM] FinCenturion: anyhoo, then you use the export image button and set a file name, then final resolution\\
[4:25 PM] FinCenturion: it's a bit of a bother at first but QGIS is a massive help once you get used to it\\
[4:26 PM] NigeyS: that'll help thanks, i have all the co-ords etc


====== Open Questions ======

Snake Man: ok when you choose area of terrain you want to download, do you just get "bulk" data with large amounts of room to maneuver or do you get square power of two exact size for arma3 use like 10km x 10km?

Answer: for global mapper you just get bulk data and cut it there, no idea if this is possible in QGIS...
PMC Editing Wiki

User Tools

Site Tools

Page Tools
