PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ArmA 3 Linux Dedicated Server Steam Install ======

**ArmA 3 Linux Dedicated Server Steam Install** tutorial instructions.

Go to your home directory. Make "steam/" directory there.
<code>
mkdir steam
</code>

Make "arma3/" directory there.
<code>
mkdir arma3
</code>

Go to steam directory and download the steam client.
<code>
wget http://media.steampowered.com/installer/steamcmd_linux.tar.gz
</code>

Unpack it.
<code>
tar xvf steamcmd_linux.tar.gz
</code>

And run it the first time when it should upgrade itself automatically.
<code>
./steamcmd.sh
</code>

Exit steam shell by using "quit" command.

Go to your arma3 directory and create upgrade-arma-3 file there.
<code>
nano upgrade-arma-3
</code>

Write the following line there.
<code>
/home/<NAME>/steam/steamcmd.sh +runscript /home/<NAME>/arma3/update-arma-3.txt
</code>
Where you obviously replace <NAME> with your name or fix the path with where ever you installed steam/ dir.

Now create permissions for that file.
<code>
chmod 755 upgrade-arma-3
</code>

Now open the update-arma-3.txt file and write there the following.
<code>
// Stop the script if any commands fail
@ShutdownOnFailedCommand 1

// Do not prompt for a password, use the one specified in the login command
@NoPromptForPassword 1

// Login to the given steam account
login <steam login> <steam password>

// Set the directory where A3 is/will be installed
force_install_dir /home/<NAME>/arma3

// Install or update the files for App ID 233780, the A3 server
app_update 233780 validate

// Exit the Steam shell
quit
</code>
Again you obviously replace <steam login> <steam password> with your login/password and <NAME> with the proper directory.

Now install ArmA 3 files from steam using upgrade-arma-3 command.
<code>
./upgrade-arma-3
</code>
At this time it will download whole ArmA 3 game/server files for you. Some of the files have been already prepared for specific linux server use which is nice.

At the time this tutorial was written, the ArmA 3 development branch "beta" is not available for Linux Steam install.

**Configs**

Here are some config files.

Basic.cfg:
<code cpp>
language="English";
adapter=-1;
MinBandwidth=800000;
MaxBandwidth=25000000;
MaxMsgSend=384;
MaxSizeGuaranteed=512;
MaxSizeNonguaranteed=256;
MinErrorToSend=0.003;
MaxCustomFileSize=100000;
Windowed=0;
serverLongitude=0;
serverLatitude=52;
serverLongitudeAuto=0;
serverLatitudeAuto=52;
</code>

pmc.cfg:
<code cpp>
// STEAM
steamport               = 8766;  //default 8766, needs to be unique if multiple serves on same box
steamqueryport          = 27016; //default 27016, needs to be unique if multiple servers on same box

// GLOBAL SETTINGS

hostname                = "PMC Tactical";       // The name of the server that shall be displayed in the public server list
//password              = "ServerAccessPassword";       // Password for joining, eg connecting to the server
passwordAdmin           = "MyPassword";             // Password to become server admin. When you're in Arma MP and connected to the server, type '#login xyz'
reportingIP             = "arma3pc.master.gamespy.com"; // This is the default setting. Leave empty for private servers if you do not want your server listed publicly
logFile                 = "logs_pmc/server_console_pmc.log";
verifySignatures        = 2;
equalModRequired        = 0;    // kick if data/mods aren't equal
requiredSecureId        = 2;    // was used to define type of secureID

// WELCOME MESSAGE ("message of the day")
// It can be several lines, separated by comma
// Empty messages "" will not be displayed at all but are only for increasing the interval

motd[]={
"PMC Tactical",
"http://tactical.nekromantix.com/",
"Enjoy"
};
motdInterval            = 30;   // Time interval (in seconds) between each message

// JOINING RULES
maxPlayers              = 32;   // Maximum amount of players. Civilians and watchers, beholder, bystanders and so on also count as player.
kickDuplicate           = 1;    // Each ArmA version has its own ID. If kickDuplicate is set to 1, a player will be kicked
//requiredBuild         = 12345 // Require clients joining to have at least build 12345 of game, preventing obsolete clients to connect

// VOTING
voteMissionPlayers      = 1;    // Tells the server how many people must connect so that it displays the mission selection screen.
voteThreshold           = 0.33; // 33% or more players need to vote for something, for example an admin or a new map, to become effective
//voteMissionPlayers    = 0;

// INGAME SETTINGS
disableVoN              = 0;    // If set to 1, Voice over Net will not be available
vonCodecQuality         = 11;   // supports range 1-30 //8kHz is 0-10 (narrowband), 16kHz is 11-20 (wideband), 32kHz is 21-30 (ultrawideband)
persistent              = 1;    // If 1, missions still run on even after the last player disconnected.
timeStampFormat         = "full";       // Set the timestamp format used on each report line in server-side RPT file. Possible values are "none" (default),"short","full".
BattlEye                = 1;    // Server to use BattlEye system
allowedLoadFileExtensions[] = {"txt", "hpp"};   // only allow files with ".txt" and ".hpp" extension to be loaded via loadFile command (since Arma 3 1.19.124216)

localClient[]           = {127.0.0.1};  // To indicate clients with unlimited bandwidth

// SCRIPTING ISSUES
onUserConnected         = "";
onUserDisconnected      = "";
doubleIdDetected        = "";

// SIGNATURE VERIFICATION
onUnsignedData          = "kick (_this select 0)";      // unsigned data detected
onHackedData            = "kick (_this select 0)";      //"ban (_this select 0)"; // tampering of the signature detected
onDifferentData         = "";
</code>

pmc.arma3profile:
<code cpp>
version=2;

viewDistance=3000;
preferredObjectViewDistance=3000;
terrainGrid=12.5;
activeKeys[]=
{
};

class Difficulties
{
    class recruit
    {
        class Flags
        {
            Armor=1;
            FriendlyTag=0;
            EnemyTag=0;
            MineTag=1;
            HUD=1;
            HUDPerm=1;
            HUDWp=1;
            HUDWpPerm=1;
            HUDGroupInfo=1;
            AutoSpot=1;
            Map=1;
            WeaponCursor=1;
            AutoGuideAT=1;
            ClockIndicator=1;
            3rdPersonView=1;
            UltraAI=0;
            CameraShake=0;
            UnlimitedSaves=1;
            DeathMessages=1;
            NetStats=1;
            VonID=1;
            ExtendetInfoType=1;
        };
        skillFriendly=0.6;
        skillEnemy=0.6;
        precisionFriendly=0.28;
        precisionEnemy=0.28;
    };
    class regular
    {
        class Flags
        {
            Armor=1;
            FriendlyTag=1;
            EnemyTag=0;
            MineTag=1;
            HUD=1;
            HUDPerm=1;
            HUDWp=1;
            HUDWpPerm=1;
            HUDGroupInfo=1;
            AutoSpot=1;
            Map=1;
            AutoSpot=1;
            Map=1;
            WeaponCursor=1;
            AutoGuideAT=1;
            ClockIndicator=1;
            3rdPersonView=1;
            UltraAI=0;
            CameraShake=1;
            UnlimitedSaves=1;
            DeathMessages=1;
            NetStats=1;
            VonID=1;
            ExtendetInfoType=1;
        };
        skillFriendly=0.6;
        skillEnemy=0.6;
        precisionFriendly=0.28;
        precisionEnemy=0.28;
    };
    class veteran
    {
        class Flags
        {
            Armor=0;
            FriendlyTag=0;
            EnemyTag=0;
            MineTag=1;
            HUD=1;
            HUDWp=1;
            HUDWpPerm=1;
            HUDGroupInfo=1;
            AutoSpot=0;
            WeaponCursor=0;
            ClockIndicator=1;
            3rdPersonView=1;
            UltraAI=0;
            CameraShake=0;
            DeathMessages=0;
            NetStats=1;
            VonID=1;
            ExtendetInfoType=0;
        };
        skillFriendly=0.6;
        skillEnemy=0.6;
        precisionFriendly=0.28;
        precisionEnemy=0.28;
    };
    class mercenary
    {
        class Flags
        {
            HUD=1;
            AutoSpot=0;
            WeaponCursor=0;
            DeathMessages=0;
            NetStats=1;
            VonID=1;
        };
        skillFriendly=0.6;
        };
        skillFriendly=0.6;
        skillEnemy=0.6;
        precisionFriendly=0.28;
        precisionEnemy=0.28;
    };
};

difficulty="veteran";
</code>

pmc-arma3-server:
<code cpp>
#!/bin/bash
#
#=======================================================================
#========               CONFIGURATION PARAMETERS                ========
#======== MUST BE EDITED MANUALLY TO FIT YOUR SYSTEM PARAMETERS ========
#=======================================================================
ARMA_DIR=/home/<NAME>/arma3
CONFIG=pmc.cfg
PORT=2502
NAME=pmc
PIDFILE=${ARMA_DIR}/${PORT}.pid
RUNFILE=${ARMA_DIR}/${PORT}.run
LOGFILE=${ARMA_DIR}/logs_pmc/log.pmc.${PORT}.txt
SERVER=${ARMA_DIR}/arma3server
OTHERPARAMS="-cpucount=2"
#=======================================================================
ulimit -c 1000000

case "$1" in


    start)
        if [ -f ${RUNFILE} ]; then
            $0 stop
        fi
        echo "Starting ArmA 3 server..."
        # file to mark we want server running...
        echo "go" >${RUNFILE}
        # launch the background watchdog process to run the server
        nohup </dev/null >/dev/null $0 watchdog &
        ;;

    stop)
        echo "Stopping ArmA 3 server..."
        if [ -f ${RUNFILE} ]; then
        # ask watcher process to exit by deleting its runfile...
            rm -f ${RUNFILE}
        fi
        # and terminate ArmA 3 server process
        if [ -f ${PIDFILE} ]; then
            kill -TERM $(< ${PIDFILE})
            if [ -f ${PIDFILE} ]; then
                rm -f ${PIDFILE}
            fi
        fi
        ;;

    status)
        if [ -f ${RUNFILE} ]; then
            echo "Server should be running..."
        else
            echo "Server should not be running..."
        fi
        if [ -f ${PIDFILE} ]; then
            PID=$(< ${PIDFILE})
            echo "PID file exists (PID=${PID})..."
            if [ -f /proc/${PID}/cmdline ]; then
                echo "Server process seems to be running..."
            fi
                echo "Server process seems to be running..."
            fi
        fi
        ;;

    check)
        echo -n "ArmA 3 directory: ${ARMA_DIR} "
        if [ -d ${ARMA_DIR} ]; then
            echo "OK"
        else
            echo "MISSING!"
        fi

        echo -n "Server executable: ${SERVER} "
        if [ -x ${SERVER} ]; then
            echo "OK"
        else
            echo "ERROR!"
        fi

        echo "Port number: ${PORT}"

        echo -n "Config file: ${CONFIG} "
        if [ -f ${CONFIG} ]; then
            echo "OK"
        else
            echo "MISSING!"
        fi

        echo "PID file: ${PIDFILE}"
        echo "RUN file: ${RUNFILE}"

        ;;

    restart)
        $0 stop
        $0 start
        ;;

    watchdog)
        # this is a background watchdog process. Do not start directly
        while [ -f ${RUNFILE} ]; do
        # launch the server...
            cd ${ARMA_DIR}
            echo >>${LOGFILE} "WATCHDOG ($$): [$(date)] Starting server (port ${PORT})..."
            ${SERVER} >>${LOGFILE} 2>&1 -server -config=${CONFIG} -name=${NAME} -port=${PORT} -pid=${PIDFILE} ${OTHERPARAMS}
            if [ -f ${RUNFILE} ]; then
                echo >>${LOGFILE} "WATCHDOG ($$): [$(date)] Server died, waiting to restart..."
                sleep 5s
            else
                echo >>${LOGFILE} "WATCHDOG ($$): [$(date)] Server shutdown intentional, watchdog terminating"
            fi
        done
        ;;
    *)
        echo "$0 (start|stop|restart|status|check)"
        ;;
esac
</code>
Here you also replace <NAME> with whatever directory you are using. Also note the "logs_pmc/" directory this example uses, you should change this to what directory you prefer.
PMC Editing Wiki

User Tools

Site Tools

Page Tools
