PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Batch File Examples ======

This is under arma3 namespace but there are various batch file examples which suit all arma games or even generic tasks that has nothing to do with arma.


====== PMC MoveObject Setup ======

Here we show you how to change paths into model P3D, material RVMAT and terrain PEW / WRP files using Mikero Tools MoveObject.

Main concept is these files.
  * _MASTER_paths.txt
  * _run_update_FILETYPE_list.bat
  * _run_moveobject.bat
  * _run_moveobject_log.bat

_MASTER_paths.txt contains the moveobject replacement "source destination" list (refer to moveobject documentation for proper format etc).

_run_update_FILETYPE_list.bat is to update file type list, this basically depends on which directory you are, if you're doing models then you use P3D bat, if you do rvmat's in Data\ directory, then you use rvmat bat and you guessed it, if you do terrains then you use PEW / WRP bat.

_run_moveobject_log.bat file creates text file log out of the p3d/rvmat/pew/wrp file content regarding textures, proxys etc. This log file is useful to track down what your file contains. Also note that often times it grows very large, so use [[:editing_tools#text_editing|proper text editor]] to open it and be very careful if you perform some search & replace etc operations to log file sized in 50+ megabytes.

_run_moveobject.bat is the actual moveobject executing bat which runs the program using master paths text as config and after its done it runs log file creation.

**How it works?**

  - run the _run_update_<filetype>_list.bat file to list all the filetype files in your directory.
  - create proper _MASTER_paths.txt of the replacements you want to make
  - run _run_moveobject.bat to execute
  - inspect _log.txt file for results


===== P3D Files =====

**_run_moveobject.bat**
<code dos>
@echo off
for /F %%i in (_p3d_list.txt) do (
\tools\mikero\moveobject %%i _MASTER_paths.txt >>_log.txt
)
if exist *.old.p3d del *.old.p3d
call _run_moveobject_log.bat
pause
exit
</code>

**_run_moveobject_log.bat**
<code dos>
@echo off
del _log.txt
for /F %%i in (_p3d_list.txt) do (\tools\mikero\moveobject -L "%%i" >>_log.txt)
</code>

**_run_update_p3d_list.bat**
<code dos>
dir *.p3d /o /b >_p3d_list.txt
</code>

===== RVMAT Files =====

**_run_moveobject.bat**
<code dos>
@echo off
for /F %%i in (_rvmat_list.txt) do (
\tools\mikero\moveobject %%i _MASTER_paths.txt >>_log.txt
)
call _run_moveobject_log.bat
if exist *.old.rvmat del *.old.rvmat
pause
exit
</code>

**_run_moveobject_log.bat**
<code dos>
@echo off
del _log.txt
for /F %%i in (_rvmat_list.txt) do (\tools\mikero\moveobject -L "%%i" >>_log.txt)
</code>

**_run_update_rvmat_list.bat**
<code dos>
dir *.rvmat /o /b >_rvmat_list.txt
</code>


===== PEW / WRP Files =====

**_run_moveobject.bat**
<code dos>
@echo off
for /F %%i in (_pew_list.txt) do (
\tools\mikero\moveobject %%i _MASTER_paths.txt >>_log.txt
)
if exist *.old.pew del *.old.pew
call _run_moveobject_log.bat
pause
exit
</code>

**_run_moveobject_log.bat**
<code dos>
if exist _log.txt del _log.txt
for /F %%i in (_pew_list.txt) do (\tools\mikero\moveobject -L "%%i" >>_log.txt)
</code>

**_run_update_pew_list.bat**
<code dos>
dir *.pew /o /b >_pew_list.txt
</code>

Hopefully you already know how to switch from PEW to WRP file use.


====== ArmA 2 Binarize CMD Line ======

How to use bis binpbo to binarize using command line. This assumes you have text file list of all your addons to be binarized, here its named "pmc_ags_build_temp.txt".

**_run_binarize_ags_build_temp.bat**
<code dos>
@echo off
set BINPBOPATH="C:\armatools\BinPBO\BinPBO.exe"
set TEMPPATH="C:\temp"
set DESTINATION="c:\arma2Projects\ags_build\addons"
 
for /F %%i in (pmc_ags_build_temp.txt) do (
%BINPBOPATH% "P:\pmc\%%i" %DESTINATION% -BINARIZE -DEBUG -TEMP %TEMPPATH% -INCLUDE "c:\armatools\Binarize_Includes.txt" -PROJECT "P:\pmc" -PREFIX pmc\%%i
)
pause
exit
</code>


====== List Directories ======

Generates _list.txt file from directory names in current directory. No extra text / junk shown, just plain directory names.

<code dos>
dir /b /ad >_list.txt
</code>


====== PNG to PAA early version ======

This is generic PNG to PAA conversion, if you are converting terrain layers\*.png then you should use [[arma2:terrain:howto-convert-layers-png-fast|arma2 terrain howto convert layers png fast]] or [[arma3:terrain:convert-layers-png-fast|arma3 terrain convert layers png fast]]

**Pal2Pace to run all PNG files in Visitor 3 terrains:**
<code dos>
FOR %%i IN (*.png) DO (D:\armatools\texview2\pal2pace %%i)
</code>


====== MoveObject Example 1 ======

**MoveObject from PboDll package:**
<code dos>
set MOVEOBJECT="T:\pbodll\MoveObject.exe"

FOR /F %%i IN (FileList.txt) DO (
	FOR /F "tokens=1-5" %%a IN (ReplacePathAwithB.txt) DO (
		%MOVEOBJECT% %%i %%a %%b
	)
)
</code>


====== ExtractPbo Addons Dir ======

**ExtractPbo whole arma2 expansion addon dir:**
<code dos>
for %%x in (\arma2\expansion\addons\*.pbo) do (
\tools\mikero\extractpbo -F *.p3d %%x .
)
</code>


====== DeRapify RVMAT ======

**DeRapify rvmat so that you don't have to rename all the .rvmat.txt files?**
<code dos>
@echo off
md tmp
for %%x in (*.bisurf) do (\tools\mikero\derapify %%x tmp\%%x)
move tmp\*.bisurf .
for %%x in (*.rvmat) do (\tools\mikero\derapify %%x tmp\%%x)
move tmp\*.rvmat .
rd tmp
pause
exit
</code>


====== RegExp : RVMATs ======

Not actually a dos batch file, but hey :)

**RegExp how to fix something.rvmat:ca\path\to\texture.paa with just ca\...**
<code>
.*:
</code>


====== PAA to TGA / PNG ======

**Pal2Pace all PAA to TGA / PNG**
<code dos>
@echo off
MD temp
FOR /F "tokens=1* delims=. " %%A in ('dir /b *.paa') do (
D:\armatools\texview2\Pal2PacE %%A.paa temp\%%A.tga
 if ERRORLEVEL 1 goto err
)
pause
</code>

Similar one found from Mikero's tools called "paxToTga"
<code dos>
dir /b/s/a-h  "%1%\*.paa" >listdir.txt
dir /b/s/a-h  "%1%\*.pac" >>listdir.txt

FOR /F "tokens=1* usebackq delims=" %%A in (listdir.txt) do (
 echo %%A
 pal2pace.exe "%%A" "%%A.tga"
</code>


====== Crete config.cpp from List ======

**Create config.cpp or model.cfg from list of P3D names**
<code dos>
for /F %%i in (list.txt) do (

echo 	class Land_%%i: Land_ammostore2 >>new_config.cpp
echo 	{ >>new_config.cpp
echo 		displayName = "(building) %%i"; >>new_config.cpp
echo 		model = "\pmc\vte_bis_obj\%%i.p3d"; >>new_config.cpp
echo 	}; >>new_config.cpp
)
pause
</code>

Same with RegExp for editpadpro:
<code>
(.*)
===>
class LAND_\1: House
{
displayName = "\1";
Armor = 10000;
destrType="DestructNo";
model = "\x\ofpip\OFPIP\addons\p_bi_cwc_objects\\\1.p3d";
scope = 1;
vehicleClass = "OFPIP_Objects";
};
</code>


====== Get Todays Date ======

Get todays date for example to be used when creating backup archive files with time stamp.

**Date**
<code dos>
for /f "tokens=2-4 delims=/ " %%a in ('date /T') do set year=%%c
for /f "tokens=2-4 delims=/ " %%a in ('date /T') do set month=%%a
for /f "tokens=2-4 delims=/ " %%a in ('date /T') do set day=%%b
echo %year%-%month%-%day%
</code>
PMC Editing Wiki

User Tools

Site Tools

Page Tools
