PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ArmA 2 Sound ======

If there are 3 parameters, then from second (volume in dB) is used for maximum distance calculation, max. distance is emitter distance from listener where sound from this emitter is not audible.

When in cfg are four parameters, then 4 parameter is distance in meters, and second parameter (volume in dB) is ignored - is recalculated based on max distance.

0dB == 1000m

is recalculated based on max distance

What max distance is this - related to view distance?

Sample volume is recalculated, volume is derived from distance ( where 0dB = 1000m ), there is no "real" difference between these to entries.

Distance == view distance.

Some more good information - details about new class Sounds of cfgVehicles.

  * frequency range is [0.6, inf] but usable range is somewhere about 1 that's [0.8, 1.2]
  * randomizer = small random number unique for each vehicle, range [0, 1]
  * angular velocity - but this controller is not much usable, because values are discrete, not smooth, so in frame N it should be 0 and in frame N+1 it should be 2
  * factor - linear interpolation between A and B based on x, value = A + (B - A) *x, trick to get peak is using min{ X factor [A, B], X factor [B, A] }


====== Example config ======

Here is example helicopter engine / rotor sound config.
<code cpp>
		class Sounds
		{
			class Engine
			{
				sound[] = {"pmc\vte_sounds\vehicle\CH47_engine_high_ext.wss", 1, 1, 800};
				frequency = "rotorSpeed";
				volume = "camPos*((rotorSpeed-0.72)*4)";
			};
			
			class RotorLowOut
			{
				sound[] = {"pmc\vte_sounds\vehicle\CH47_rotor_ext.wss", 3.1622777, 1, 1500};
				frequency = "rotorSpeed";
				volume = "camPos*(0 max (rotorSpeed-0.1))";
				cone[] = {1.8,3.14,2.0,0.9};
			};
			
			class RotorHighOut
			{
				sound[] = {"pmc\vte_sounds\vehicle\CH47_rotor_forsage_ext.wss", 3.1622777, 1, 1800};
				frequency = "rotorSpeed";
				volume = "camPos*10*(0 max (rotorThrust-0.95))";
				cone[] = {1.8,3.14,2.0,0.9};
			};
			
			class EngineIn
			{
				sound[] = {"pmc\vte_sounds\vehicle\CH47_engine_high_int.wss", 1.7782794, 1};
				frequency = "rotorSpeed";
				volume = "(1-camPos)*((rotorSpeed-0.75)*4)";
			};
</code>

CfgEnvSounds example
<code cpp>
class CfgEnvSounds
{
        class Meadows
        {
        sound[] ={"\ca\sounds\Ambient\meadows\wind-meadow-2",0.0316228,1};
        volume = "(1-forest)*(1-houses)*(1-night)*(1-sea)";
        randSamp1[] ={"ca\sounds\Ambient\meadows\meadow_sfx_01",0.1,"125",0.15,8,15,20};
        randSamp2[] ={"ca\sounds\Ambient\meadows\meadow_sfx_02",0.1,1,25,0.15,8,15,20};
        randSamp3[] ={"ca\sounds\Ambient\meadows\meadow_sfx_03",0.1,"125",0.15,15,30,40};
        randSamp4[] ={"ca\sounds\Ambient\meadows\meadow_sfx_04_crickets",0.01,1,25,0.15,15,30,40};
        randSamp5[] ={"ca\sounds\Ambient\meadows\meadow_sfx_05_crickets",0.00562341,1,25,0.1,8,15,20};
        randSamp6[] ={"ca\sounds\Ambient\meadowsmeadow-sfx-06",0.01,1,25,0.1,8,10,20};
        random[] ={"randSamp1","randSamp2","randSamp3","randSamp4","randSamp5","randSamp6"};
        };

        class Forest
        {
                sound[] ={"ca\sounds\Ambient\forestforest-day-2",0.0398107,1};
                volume = "forest*(1-night)";
                randSamp11[] ={"ca\sounds\Ambient\forestforest-sfx-9bird",0.1,1,30,0.14,5,8,10};
                randSamp10[] ={"ca\sounds\Ambient\forestforest-sfx-12datel",0.1,30,0.125,10,20,40};
                randSamp0[] ={"ca\sounds\Ambient\forestforest-sfx-5bird",0.125893,1,30,0.13,4,8,12};
                randSamp1[] ={"ca\sounds\Ambient\forestforest-sfx-6bird",0.125893,1,30,0.125,4,8,12};
                randSamp2[] ={"ca\sounds\Ambient\forestforest-sfx-7bird",0.125893,1,30,0.125,4,8,12};
                randSamp3[] ={"ca\sounds\Ambient\forestforest-sfx-8bird",0.125893,1,30,0.1,4,8,12};
                randSamp8[] ={"ca\sounds\Ambient\forestforest-sfx-10bird-flapping",0.1,1,30,0.04,10,20,40};
                randSamp9[] ={"ca\sounds\Ambient\forestforest-sfx-11holub-flapping",0.1,1,30,0.04,10,20,40};
                randSamp4[] ={"ca\sounds\Ambient\forestforest-sfx-1",0.1,1,30,0.025,4,8,10};
                randSamp5[] ={"ca\sounds\Ambient\forestforest-sfx-2",0.1,1,30,0.025,4,8,10};
                randSamp6[] ={"ca\sounds\Ambient\forestforest-sfx-3",0.1,1,30,0.025,4,8,10};
                randSamp7[] ={"ca\sounds\Ambient\forestforest-sfx-4",0.1,1,30,0.025,4,8,10};
                random[] ={"randSamp11","randSamp10","randSamp0","randSamp1","randSamp2","randSamp3","randSamp8","randSamp9","randSamp4","randSamp5","randSamp6","randSamp7"};
        };

        class ForestNight
        {
                sound[] ={"ca\sounds\Ambient\forestforest-night-1",0.0562341,1};
                volume = "forest*night";
                randSamp1[] ={"ca\sounds\Ambient\forestforest-night-sfx-1",0.1,"125",0.15,8,15,20};
                randSamp2[] ={"ca\sounds\Ambient\forestforest-night-sfx-2",0.1,1,25,0.15,8,15,20,30};
                randSamp3[] ={"ca\sounds\Ambient\forestforest-sfx-10bird-flapping",0.1,"125",0.15,15,30,40};
                randSamp4[] ={"ca\sounds\Ambient\forestforest-sfx-11holub-flapping",0.1,"125",0.15,15,30,40};
                randSamp5[] ={"ca\sounds\Ambient\forestforest-sfx-1",0.0562341,1,25,0.1,8,15,20};
                randSamp6[] ={"ca\sounds\Ambient\forestforest-sfx-2",0.0562341,1,25,0.1,8,10,20};
                randSamp7[] ={"ca\sounds\Ambient\forestforest-sfx-3",0.0562341,1,25,0.1,8,10,20};
                randSamp8[] ={"ca\sounds\Ambient\forestforest-sfx-4",0.0562341,1,25,0.1,8,10,20};
                random[] ={"randSamp1","randSamp2","randSamp3","randSamp4","randSamp5","randSamp6","randSamp7","randSamp8"};
        };

        class Rain
        {
                sound[] ={"\Ca\sounds\Ambient\rain\rain_hard1",0.177828,1};
                volume = "rain";
                soundNight[] ={"\Ca\sounds\Ambient\rain\rain_hard1",0.177828,1};
        };
</code>

Solid insideSoundCoeff's
<code cpp>
// UH60
insideSoundCoef = 0.001;
occludeSoundsWhenIn = 0.02;
obstructSoundsWhenIn = 0.02;
</code>

EngineLowOut {"A10_Ext_Engine_Low", 45.2387, 1, 700}

This sound you should hear last, its the rumble or 'jet wash' you get when an aircraft makes as it gets closer to your position.

EngineHighOut {"A10_Ext_Engine_High", 25.2387, 1, 1100}

This is the 'throttle' sound, the sound activates when you apply acceleration as well as sounding at other (from what I can tell) drastic stick movements ? Had to define when you start to hear it but somewhere between the two others gives me the best results during a flyby.

ForsageOut {"A10_Ext_Engine_Idle", 40.2387, 1, 4000}

This is the main engine sound, this kicks in as the the engine_start sound is fading out and plays a constant loop until you stop the engine or it gets destroyed.

{"V_55", 1.0, 0.5, 900};\\
1.0 is volume at source\\
0.5 is pitch 0.0 being same as orginal sample\\
900 is volume over distance (how far it can be heard)

Check out basic [[sound_config_tutorial|Sound config tutorial]].
PMC Editing Wiki

User Tools

Site Tools

Page Tools
