PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Scripting ======

ArmA 2 will be largely compatible with Armed Assault. To make porting of content from ArmA as simple as possible, there are few important things:

  * using of undefined variable in scripts (nil value) will be in ArmA 2 strictly reported as an error. All variables used in any scripts must be initialized before first use.

  * in ArmA 2 namespaces will be introduced for user scripts and variables. There are many low level reasons to do this and most of the content will be not be affected by this in any negative way. However, in order to be prepared, it is very important to separate UI related scripts and code as much as possible and not simply share global variables between UI and missions as UI namespace needs to be handled differently.

  * in order to maintain smooth frame rate in real-time content, time limit for all scripts in each frame is enforced by the engine in ArmA 2. Generally speaking, in case of more demanding scripts, be prepared that their result may come way later and also there probably can suffer from significant latency. It is under evaluation if and how possibly allow user scripts to change how much time they may take from the CPU in every frame.

  * SQS script format will be fully supported in ArmA 2.

**initJIPcompatible.sqf** is automatically started at unknown time, best guess would be when JIP player joins?


Multiplayer [[arma2:scripting:dedicated_server_broadcasting|Dedicated server broadcasting]] to all clients.


====== Scripting Commands ======

There's a lot of cool scripts (functions) available in Modules.pbo - especially under "Functions" and even an multiplayer Framework in "MP".

Since ArmA 2 you must first initialize a variable before you reference it in your scripts. In ArmA, it was not a problem, at least for conditions.
<code cpp>
// this will error if myBoolean was not previously defined.
if (myBoolean) then { hint "test" };
</code>
Usage of isNil is still valid.


===== BIS fnc locations =====

BIS fnc locations

Description: Creates or registers location logics (used in various modules, like [[arma2:editor_modules:alice|Ambient Civilians]], [[arma2:editor_modules:silvie|Ambient Civilian Vehicles]] or Warfare 2).

Upon registering, function will set following variables into location logic's variable space:

  * "class" - unique class of location (either BIS_loc_<configname> or BIS_loc_custom_<ID>)
  * "name" - name of location from config or setName command. If none is defined, class is used
  * "type" - config type
  * "neighbors" - config defined neighbor locations 

If you're registering currently existing object and some of variables above is already stored in it, it won't be replaced.

Syntax

Syntax: [type(s),area,debug] call BIS_fnc_locations

Parameters: type(s): String or Array of strings\\
area: Array in format [center,distance]\\
debug: (Optional): Boolean

Return Value: Array - List of registered locations

Alternative Syntax

Syntax: [objects] call BIS_fnc_locations

Parameters: objects: Array of Objects or Locations - list of specific locations to be registered

Return Value: Array - List of registered locations

Examples

Example 1:
<code cpp>
["CityCenter",[position player,1000]] call bis_fnc_locations;
</code>

Example 2:
<code cpp>
[["acityc_dolina"]] call bis_fnc_locations;
</code>

Example 3:
<code cpp>
[[myLocation1,myLocation2],[],true] call bis_fnc_locations;
</code>

See also:

Functions Library (above hehe)


===== allowDamage =====

Description: Allow an object to be damaged (or injured, or killed).

Syntax: object allowDamage allow

Parameters: object: Object - allow: Boolean -

Example 1:
<code cpp>
player allowDamage false
</code>


===== setVariable =====

setVariable now has a 3rd parameter: Global.

If you set the 3rd parameter to true, the variable will broadcast its value to every machine.
<code cpp>
_myObject setVariable ["myVariable", 1, true];
</code>

setVariable is now usable on any object, like groups for instance. This was not the case in ArmA.


===== uiNameSpace =====

Working with UI related scripting commands, is not accepted in global or private variable space, and needs to be done inside uiNameSpace by using setVariable.

example:
<code cpp>
// set it
uiNameSpace setVariable ["myVariable", ctrl...];
// use it
ctrl.... (uiNameSpace getVariable "myVariable");
</code>


===== createDiaryRecord =====

createDiaryRecord

<code cpp>
_diary = player createDiaryRecord ["Diary", ["Technische Details", "Keine"]];
</code>


===== createSimpleTask =====

createSimpleTask

<code cpp>
task1 = player createSimpleTask ["obj1"];
</code>


===== setSimpleTaskDescription =====

setSimpleTaskDescription

<code cpp>
task1 setSimpleTaskDescription ["Description <marker name=""Start"">Start</marker> posit.","more text","more text"];
</code>


===== setSimpleTaskDestination =====

setSimpleTaskDestination

<code cpp>
task1 setSimpleTaskDestination markerPos "Start";
</code>


===== setTaskState =====

setTaskState

<code cpp>
task1 setTaskState "Created";
</code>


===== setCurrentTask =====

setCurrentTask

<code cpp>
player setCurrentTask task1;
</code>


===== attachTo =====

attachTo, see also detach.

<code cpp>
// Make player float exactly 2m above center of car, automatically changing vectordir + relative position as car moves.
player attachTo [car, [0,0,2]];
detach player;
</code>


===== diag_log =====

diag_log writes any variable ([_fish, _frog] or "Hello, I'm starting to initialize myself") directly to the log, without needing to pass it via format/str and without any extra text.


===== Changing nameSpace =====

You can change namespace inside another namespace. Note that 1 misionNamespace refers to the normal global scope and 1 uiNamespace is the one where you are forced to store any control/display handles:
<code cpp>
fish = "Frog!";

with uiNamespace do
{
	// Do some stuff with dialogs here.

	with missionNamespace do
	{
		hint fish; // This sees the "regular" mission namespace.
	};
	// Do some more stuff with dialogs here.
};
</code>

I have no idea what the purpose of 1 parsingNamespace is.


===== Access nameSpace =====

The command 1 with gives you a much nicer way to access namespaces and is especially cleaner when making multiple accesses:
<code cpp>
with uiNameSpace do
{
	// Any globals in this block are taken from uiNameSpace.
	// Any locals are normal locals from current scope.
	(fishDisplay displayCtrl 102) ctrlSetText _frog;
	piesControl ctrlSetText _pies;
	cheeseControl ctrlSetText _cheese;
};
</code>

Rather than:
<code cpp>
((uiNameSpace getVariable "fishDisplay") displayCtrl 102) ctrlSetText _frog;
(uiNameSpace getVariable "piesControl") ctrlSetText _pies;
(uiNameSpace getVariable "cheeseControl") ctrlSetText _cheese;
</code>


===== fromEditor =====

Return if given team was inserted directly from mission editor. 

Syntax:

fromEditor teamMember 

Parameters:

teamMember: Team Member

Return Value:

Boolean 

Example:
<code cpp>
_fromEditor = fromEditor _member;
</code>


===== addTeamMember =====

Add given member to given team. 

Syntax:

team addTeamMember member 

Parameters:

team: Team_Member\\
member: Team_Member

Return Value:

Nothing 

Example 1:
<code cpp>
_team addTeamMember _teamMember;
</code>


===== copyWaypoints =====

Copy the chain of waypoints from source to target group. The target group will start to process waypoints from the first one. 

Syntax:

groupTo copyWaypoints groupFrom 

Parameters:

groupTo: Group\\
groupFrom: Group

Return Value:

Nothing


===== execFSM =====

Execute the scripted FSM. The FSM file is first searched in the mission folder, then in the campaign scripts folder and finally in the global scripts folder. Returns the FSM handler or 0 when failed. 

Syntax:

execFSM filename 

Parameters:

filename: -

Return Value:

Number 

Example 1:
<code cpp>
execFSM "test.fsm";
</code>

Example 2:\\
execFSM:
<code cpp>
hndl = [player] execFSM "group_follow.fsm";
</code?

execVM:
<code cpp>
hndl = player execVM "group_follow.sqf";
</code>


====== taskHint.sqf ======

How to make task hints

taskHint is relatively useless itself (because it requires too much effort), but there is a script that makes it easier to use. So instead of executing a hint, do this:
<code cpp>
[objNull, objNull, tskExample1, "SUCCEEDED"] execVM "CA\Modules\MP\data\scriptCommands\taskHint.sqf";
</code>

The first 2 arguments are useless so i just send objNull, the 3rd is the task that you've created, and the 4th is the status.

Supported task states: "CREATED", "CURRENT", "CANCELED", "SUCCEEDED" and "FAILED".

  * This command does not set the state of the task, so you still need to do this command, and the setTaskState command in your trigger.
  * It creates the hint in the middle of the screen, not at the right side (this means that taskHint and hint can be used at the same time).
PMC Editing Wiki

User Tools

Site Tools

Page Tools
