====== Multiple Runways ====== **Multiple Airbases, Airports, Runways in your terrain**. This guide should help you to configure multiple runways to your terrain config. **Aussie**: Heres part of my config.cpp showing the airports. I have included 5 of them here. ilsPosition[] = { 30611.3, 11290.4 }; ilsDirection[] = { 0, 0.08, -1 }; ilsTaxiIn[] = { 30769, 11368.6, 30769.6, 11260.9, 30730.4, 11211.2, 30619.7, 11211.8 }; ilsTaxiOff[] = { 30611.3, 11290.4, 30612.9, 11997.1, 30664.2, 12008.4, 30731.8, 12004.5, 30728.5, 11500.4, 30769, 11368.6 }; drawTaxiway = 1; class SecondaryAirports { class ausrunwaysydney { ilsPosition[] = { 35340.4, 12373.4 }; ilsDirection[] = { -0.754709, 0.08, 0.756059 }; ilsTaxiIn[] = { 35323.1, 12218.2, 35192.5, 12351.8, 35261.3, 12436.1, 35340.4, 12373.4 }; ilsTaxiOff[] = { 35340.4, 12373.4, 36229.2, 11483, 36207.3, 11431.1, 36159.8, 11387.5, 35323.1, 12218.2 }; drawTaxiway = 1; }; class ausrunwayadelaide { ilsPosition[] = { 24888.6, 13053.1 }; ilsDirection[] = { 0.524709, 0.08, -0.958059 }; ilsTaxiIn[] = { 24688.2, 13665, 24990.9, 13119.7, 24957.6, 13078.6, 24883.4, 13063.1 }; ilsTaxiOff[] = { 24888.6, 13053.1, 24516.2, 13730.1, 24546, 13789.3, 24612.7, 13800.5, 24688.2, 13665 }; drawTaxiway = 1; }; class ausrunwayBrisbekistan { ilsPosition[] = { 37320.3, 20173.1 }; ilsDirection[] = { -0.9659, 0.08, -0.2588 }; ilsTaxiIn[] = { 37943.4, 20464.1, 37232.1, 20273.8, 37225.3, 20210.8, 37262.7, 20157.9, 37326.8, 20174.6 }; ilsTaxiOff[] = { 37320.3, 20173.1, 38071.7, 20374.4, 38093.2, 20408.0, 38074.2, 20479.6, 38049.8, 20492.8, 37943.4, 20464.1 }; drawTaxiway = 1; }; class ausrunwaydarwin { ilsPosition[] = { 16428, 34117.3 }; ilsDirection[] = { -0.9563, 0.08, 0.3360 }; ilsTaxiIn[] = { 16637, 33916.8, 16310.6, 34028.7, 16295.5, 34057.7, 16321, 34133, 16365.8, 34139.5 }; ilsTaxiOff[] = { 16428, 34117.3, 17290.8, 33820.3, 17323.8, 33784.5, 17298.3, 33710.4, 17273.3, 33697.7, 16637, 33916.8 }; drawTaxiway = 1; };