PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== OFP WRP File Format 4WVR ======

[[https://www.pmctactical.org/forum/viewforum.php?f=43|OFP Forum]], [[:ofp|OFP Home]], [[ofp:file_formats|OFP File Formats]], [[ofp:tools|OFP Tools]], [[ofp:missions|OFP Missions]], [[ofp:modeling|OFP 3D Modeling]], [[ofp:terrain|OFP Terrain]]

**Operation Flashpoint (OFP)** aka ArmA: Cold War Assault (CWA)

**WRP File Format - 4WVR**


====== General ======

Flashpoint wrp files use two different file formats to contain the data. This document contains information on 4WVR format as used by WrpTool and Visitor 2

This document does **not** discuss the alternate format, OPRW. Both file formats can be used directly by the engine, whether the file exists independently in ~\worlds, or, packed inside a pbo (addon).

Binarize tool by BIStudio will convert 4WVR to OPRW if desired.

(some problems exist with 2 versions of binarize)

For a general description of how simple this (or any other) wrp file construct, see 8WVR


====== Structure ======

<code cpp>
4WVR
{
	WRP4Header  Header
	Texture     Textures[[...]];
	Model       Models[[...]];
}
</code>


====== WRP4Header ======

<code cpp>
WRP4Header
{
	char Signature[[4]]; //&quot;4WVR&quot;
	ulong Xsize;       //(=256) cell dimension
	ulong Ysize;       //(=256) cell dimension
}
</code>


====== Texture ======

<code cpp>
Texture
{
	ushort Elevations  [[Ysize]][[Xsize]]; // in centimetres. See below
	ushort TextureIndex[[Ysize]][[Xsize]]; //Each 'index' refers to a filename below. Range 1..511
	Asciiz TextureFilenames[[512]][[32]];  // data\pi.paa\0|data\pi1.paa\0 .....
}
</code>


====== Elevations ======

Elevations are expressed as an integral of the gridsize.

Since the gridsize for ofp is a fixed 50 meters, to convert the value into meters:
<code>
RealHeight = Elevations[[x]][[y]] * 0.05;
</code>


====== TextureIndex ======

Each cell on the map references an texture file (pac/paa) and an elevation for that text at that cell position.
Since there could be myriads of 'sea' texture (eg), rather than have each cell list it's texture, it references a texture list via an index. In this way, THE texture which is common to many cells (at sometimes differing elevations) is only stored once.

A max of 512 texture files can be listed. Each is held as an asciiz string inside a fixed 32 byte record. Eg max length of filename is 31 characters.

The first entry (effectively index0) is never used. Even though a filename is associated with this entry. it is never accessed.

====== Model ======

<code cpp>
Model
{
	float  TransformMatrix[[4]][[3]]; // see [[Generic|FileFormat Data Types]]
	long   ObjectID;              // unique for every entry
	asciiz P3DFilename[[76]];       // "data3d\kasna.p3d";
}
</code>

The number of models varies from none, to end of file. Each model is 128 bytes in length.

Note that this is in marked contrast to an 8WVR file. In 8WVR, there is always a minimum of one entry. The last (or only) entry in an 8WVR has no filename associated with it.


====== FilePaths ======

Despite the impression given (lack of a leading \) All filenames (pac/paa and p3d files) are HARD WIRED to the (virtual) pboRoot\ directory.

The PboRoot\ directory is built in-situ during game load and consists of an index table of all addons from 'anywhere' in the game structure. Eg, the official Addon Directories (plural), the bin\folder, plus any oem addons stated in the command line.