PMC Editing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ArmA 3 East Wind Campaign Description.ext ======

[[https://www.pmctactical.org/forum/viewforum.php?f=68|ArmA 3 Forum]], [[:arma3|ArmA 3]], [[arma3:config|ArmA 3 Config]], [[arma3:missions|ArmA 3 Missions]], [[arma3:modeling|ArmA 3 3D Modeling]], [[arma3:scripting|ArmA 3 Scripting]], [[arma3:terrain|ArmA 3 Terrain]], [[arma3:texturing|ArmA 3 Texturing]], [[arma3:tools|ArmA 3 Tools]]

East Wind campaign description.ext is made with FSM stuff. Here are some properties I dug up from it.
<code>
A_hub01: repeat = 1; isHub = 1;
A_hub02: repeat = 1; isHub = 1;
A_in: endDefault = A_in2; noWeaponPool = 1; isIntro = 1;
A_in2: endDefault = A_hub01; noWeaponPool = 1; isIntro = 1;
A_m01: endDefault = A_hub01; isHubMission = 1;
A_m02: endDefault = A_hub01; isHubMission = 1;
A_m03: endDefault = A_hub01; isHubMission = 1;
A_m04: endDefault = A_hub02; isHubMission = 1;
A_m05: endDefault = A_hub01; isHubMission = 1;
A_out: endDefault = B_in; isHubMission = 1;
A_skirmish01: endDefault = A_hub01; repeat = 1; isSkirmish = 1;
A_skirmish02: endDefault = A_hub02; repeat = 1; isSkirmish = 1;
B_hub01: repeat = 1; isHub = 1;
B_hub02: repeat = 1; isHub = 1;
B_hub03: repeat = 1; isHub = 1;
B_hub03: repeat = 1; isHub = 1;
B_in: endDefault = B_in2; noWeaponPool = 1; isIntro = 1;
B_in2: endDefault = B_hub01; noWeaponPool = 1; isIntro = 1;
B_m01: endDefault = B_hub02; isHubMission = 1;
B_m02_1: endDefault = B_m02_2; isHubMission = 1;
B_m02_2: endDefault = B_hub03;
B_m03: endDefault = B_hub02; isHubMission = 1;
B_m05: endDefault = B_hub02; isHubMission = 1;
B_m06: endDefault = B_hub02; isHubMission = 1;
B_out2: endDefault = C_in1; isHubMission = 1;
B_skirmish01: endDefault = B_hub01; repeat = 1; isSkirmish = 1;
B_skirmish02: endDefault = B_hub02; repeat = 1; isSkirmish = 1;
B_skirmish03: endDefault = B_hub03; repeat = 1; isSkirmish = 1;
C_EA: isOutro = 1; isHubMission = 1;
C_EB: isOutro = 1; isHubMission = 1;
C_in1: endDefault = C_in2; isHub = 1;
C_in2: endDefault = C_m01; isHubMission = 1;
C_m01: endDefault = C_m02; isHubMission = 1;
C_m02: endDefault = C_out1; isHubMission = 1;
C_out1: endDefault = C_out2; isHubMission = 1;
C_out2: endDefault = C_EA; isHubMission = 1;
</code>
  * state names are mission classes
  * condition names can be anything (even empty)
  * condition "conditions" field can contain code which has to return true in order to make the mission available. other missions' classes can be used as variables. empty field returns true by default