Differences

This shows you the differences between two versions of the page.

--- arma2:terrain:heightmap-details [2022/06/25 13:52] – added link. snakeman
+++ arma2:terrain:heightmap-details [2024/08/02 09:00] (current) – links added. snakeman
@@ Line 1: / Line 1: @@
 ====== ArmA 2 HeightMap Details ======
-**Height map increasing the details**
+[[https://www.pmctactical.org/forum/viewforum.php?f=50|ArmA 2 Forum]], [[:arma2|ArmA 2 Home]], [[arma2:config|ArmA 2 Config]], [[arma2:file_formats|ArmA 2 File Formats]], [[arma2:missions|ArmA 2 Missions]], [[arma2:modeling|ArmA 2 3D Modeling]], [[arma2:scripting|ArmA 2 Scripting]], [[arma2:terrain|ArmA 2 Terrain]], [[arma2:texturing|ArmA 2 Texturing]], [[arma2:tools|ArmA 2 Tools]]
-L3DT is able to rescale heightmap, for example my 51km terrain is 1024 grid and 50m cell size, would work in-game if I bump it up to 2048 and 25m?
+**Height Map Increasing The Details**
+[[tools:l3dt|L3DT]] is able to re-scale heightmap, for example my 51km terrain is 1024 grid and 50m cell size, would work in-game if I bump it up to 2048 and 25m?
 And if so, how can I add some bumps and lumps into the terrain, was there some erosion feature in L3DT or something?
@@ Line 29: / Line 31: @@
 You could go to a 512x512 with 25m, or a 1024x1024 with 12.5m.
-What happens ArmA 2 in-game to the terrain when you do it, does it just go smoother and objects stay in place ok or?
+What happens ArmA 2 in-game to the terrain when you do it, does it just go smoother and objects stay in place OK or?
 Whole point of using those step down multiples is that actual coordinates stay the same so missions are unaffected, all stuff is in same exact grid coordinates as before. When you re-sample it just adds more cells - it interpolates the new ones between the points of the old.
@@ Line 38: / Line 40: @@
 However when you use L3DT to increase the size of your heightfield, all works fine it seems but bridges or harbor objects end up in water on east end. Like when you have perfectly working bridge in 50m cell size, then you increase it to 12.5m size and the bridges east end is now in water and not land like it was previous. Who knows if this issue can be avoided using some other algorithm to increase the terrain heighfield size than L3DT's dunno. If you have no bridges or special objects, you're fine, if you have... then well, you got problems with special objects.